MOTUL Engine oil ATV-UTV Expert 10W40 4T, 4 liter

ATV-UTV EXPERT 4T

SAE 10W-40 TECHNOSYNTHESIS - TECHNOLOGY

MOTUL ATV-UTV EXPERT 4T 10W40 is a 4-stroke multigrade oil based on MOTUL technosynthesis, specially developed for sporty or professional use in modern All Terrain Vehicles (ATV), Utility Terrain Vehicles (UTV). For high-performance models with 4-stroke engines with or without integrated gearbox, wet or dry clutch, as well as for engines that meet Euro-2 or Euro-3 requirements.

SPECIFICATIONS/STANDARDS

STANDARDS: API SM / SL / SJ

PERFORMANCE: JASO MA
JASO (Japanese Automobile Standards Organization) has developed its own standard for 4-stroke motorbike engine oils, JASO T 903. The gradations MA, MA1 and MA2 facilitate the selection of motorbike engine oils that have been specially developed for wet clutches. JASO MA2 stands for the highest friction values and thus for optimum clutch compatibility when changing gears, during the acceleration phase and also at consistently high speeds.

ADVANTAGES

• Optimised content of sulphur and phosphorus ensure the long-term functioning of catalytic converters.
• Prevents corrosion and contamination in the engine.
• For modern engine technology with wet clutch and gearbox lubrication in the same oil bath. No clutch sticking and slipping.
• Excellent anti-oxidation, anti-corrosion and anti-foaming properties.
• Even in low gears and under extremely high loads, ATV-UTV EXPERT 4T guarantees a stable lubricating film and protects against wear.
• Special EP additives reliably protect the gearbox against wear, facilitate the starting process even with the gear engaged as well as the shifting process.
• Low evaporation loss reduces oil consumption.

RECOMMENDATIONS AND NOTES

Change interval according to vehicle manufacturer`s specifications or adjusted according to operating conditions.
Before use, always observe the manufacturer`s service documents and recommendations!

PROPERTIES

Colour (visual) brownish
Viscosity SAE J 300 10W-40
Density at 20°C ASTM D 1298 0.859
Viscosity at 100°C ASTM D 445 13.6 mm²/s
Viscosity at 40°C ASTM D 445 89.5 mm²/s
Viscosity index ASTM D 2270 156
Pour point ASTM D 97 -32°C
Flash point ASTM D 92 225°C
TBN ASTM D 2896 7.6 mg KOH/g