Visto más recientemente
Helicoil Combined drilling and tapping tool M8x1,25
No.: 200108046
Tuff Jug, quick release 20 liters, color blue
No.: 500605322
GILLES Speedometer-Set, black - Yamaha XSR 700
No.: 405781009
Helicoil Combined drilling and tapping tool M8x1,25
N°: 200108046
Disponibilidad:
1-2 semanas
47,01 €
*
Cantidad por referencia: trozo
Introduzca su dirección de correo electrónico y le avisaremos cuando este artículo vuelva a estar disponible.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M8
DHC 9,7
Diameter (d) M 8
Diameter (d2) 10
L1 90
L2 28
L3 11
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M8
DHC 9,7
Diameter (d) M 8
Diameter (d2) 10
L1 90
L2 28
L3 11
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
*
Todos los precios incluyendo con y sin impuestos Costo de envío.
