motogadget motoscope mini, polished, black

Non.: 300283003
Disponibilité: 1-2 semaines
259,00 *
Unité: pièce
Saisissez votre adresse électronique et nous vous informerons lorsque cet article sera à nouveau disponible.
Details:

The motoscope mini is an extremely small, digital motorcycle instrument. The LED display, which we developed especially for this purpose, is unique in the instrument sector. 251 ultra-bright LEDs form an almost rimless, excellent readable display area, which can be used completely for the display of the readings. Only this innovative, elaborate technology enables a maximum display area with minimum housing dimensions.

The motoscope mini fits almost every two, three or four wheeler due to its very simple, elegant design and its high-quality appearance. It can be integrated in a prominent position to support the styling but also inconspicuous and clean - everything makes the mini possible! Housing:

The high-quality aluminum housing is milled from solid aluminum and its surface is anodized black. The highly polished version has its own charm. The electronics are completely encapsulated in the housing and are therefore immune to weather, water, dust and vibration.

Display and functions:

The innovative dot-matrix of 251 ultra-bright LEDs displays the speed easily detectable by a scalable horizontal light band and all other functions as numerical values. The speed can also be called up as a numerical value at the touch of a button. To achieve optimal readability in darkness, sunshine and twilight, the luminosity of the LEDs is automatically adjusted. For the limit range of the permissible speed (`red range`) or as a switching flash function, a speed value can be entered, when exceeded all LEDs light up pulsatingly at the same time.

The highlight: the display of the motoscope mini can show the numerical values not only from left to right but also from top to bottom. Therefore, the instrument can also be mounted upright!

Operation:

You can switch between the displays using the menu button supplied or, for example, the headlight flasher button on the handlebars. The standard indication on the display is the speed value. If necessary, the other measured values can be called up on the display by briefly pressing the button. Optionally, it can be set that the display automatically returns to the speed value after a short time or that a certain display is fixed.

Presettings or saved values remain stored even without power supply. Assembly:

Due to its very small dimensions the motoscope mini can be easily mounted on any vehicle almost anywhere. The motoscope mini can be mounted on the fork bridge or on the handlebars, in existing instrument panels or embedded in a tank or GRP - the instrument can be integrated anywhere. motoscope mini offers various universal mounting brackets and type-specific solutions such as Buell (TM) or Harley-Davidson (TM). See under mounting.

Connection and sensors:

The simple wiring as well as detailed installation and operating instructions make the connection of the instrument possible even for users who have not previously dealt with vehicle electrics.

The included speedometer sensor made of stainless steel is very small (M5/25 mm). With the 1.5 m long connection cable it can be easily attached to the front or rear wheel. Even vehicles with original mechanical speedo drive can be easily converted with it.

The motoscope mini is compatible with many original speedo sensors (reed contact and proximity sensors) of the vehicle manufacturers. In this case, only connections are connected and the mechanical installation of a sensor becomes unnecessary.

An intelligent `Teach-Function` enables the easy calibration of the speedometer - even for vehicles with sensors on the gearbox.

Scope of delivery:

- Instrument with approx. 75 cm connection cable
- Mini push button
- flying fuses
- 6 cable end connectors
- Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable
- 2 strong neodymium mini magnets
- 2 fastening screws M3 with washer
- Detailed installation and operating instructions

Specifications and features:

length/width/depth: 59 mm/21.5 mm/13 mm
Weight: approx. 32 g
Fastening: 2 x M3 threaded bushing
Current consumption during operation: approx. 100 mA
Current consumption in idle state: 0 mA
Operating voltage 7 V - 18 V
Operating temperature -20°... +80°C
Rev counter (LED bar): 0 - 6/ 8/ 10/ 14/ 16 krpm
Tachometer (numeric): 0 - 20 krpm
Limit range setting / switching flash: 0 - 20,000 rpm
Speedometer 0 - 999 km/h or mph
trip meter 0 - 999,99 km or mi
Total kilometers (adjustable) up to 99 999 km or mi
Travel time display 0 - 99:59 h/min
Alternatives
Non.: 300283001
Disponible en stock: 2
259,00 *
Unité: pièce
Vous pourriez aussi être intéressé par
Non.: 300283006
Disponible en stock: 1
99,00 *
Unité: pièce
109,00 *
Unité: pièce
* Tous les prix incluse TVA et hors Frais de port.
Menu
Le menu est chargé...
Dernièrement consulté
motogadget motoscope mini, polished, black
Nous utilisons des cookies pour optimiser la fonctionnalité et le contenu de la page web et pour vous fournir le meilleur service possible. Vous pouvez trouver toutes les informations sur les cookies dans notre Déclaration de confidentialité. Si vous acceptez lutilisation de cookies, vous pouvez révoquer ce consentement à tout moment avec effet pour lavenir ici.