visualizzato di recente
Helicoil Combined drilling and tapping tool M12x1,25
No.: 200108036
MG Guarnizione testa cilindro Ercole 500
No.: M8002
Helicoil Combined drilling and tapping tool M12x1,25
No.: 200108036
Disponibilità:
1-2 Settimane
34,87 €
*
Einheit: pezzo
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M12x1,25
DHC 13,7
Diameter (d) M 12x1.25
Diameter (d2) 11
L1 92
L2 35
L3 12
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M12x1,25
DHC 13,7
Diameter (d) M 12x1.25
Diameter (d2) 11
L1 92
L2 35
L3 12
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
*
tutti prezzi incl. IVA e plus Spese di spedizione.
