visualizzato di recente
Helicoil Thread cutter M10x1
No.: 200108001
Moto Guzzi Cavo aria dx lungo - 850 T3/T4/T5, G5, California
No.: 17133560-Z
Aprilia Getriebe Zahnrad RX/SX 125 Z=22
No.: AP0634120
Helicoil Thread cutter M10x1
No.: 200108001
Disponibilità:
Disponibile a magazzino: 2
14,64 €
*
Einheit: pezzo
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 10
DHC min. 11,3
Diameter (d) M 10x1
Diameter (d2) 9
L1 70
L2 22
L3 10
Pitch (P) 1
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 10
DHC min. 11,3
Diameter (d) M 10x1
Diameter (d2) 9
L1 70
L2 22
L3 10
Pitch (P) 1
Product type 0140.0
Thread type Metric standard and fine thread
Version C
*
tutti prezzi incl. IVA e plus Spese di spedizione.
