Recently Viewed Items
Helicoil Combined drilling and tapping tool M8x1,25
No.: 200108046
Moto Guzzi Taillight glass - 1100 Sport, i.e., Corsa,
No.: 31741760
Dellorto Vergaser PHBG 21 AS
No.: 3007102557
Helicoil Combined drilling and tapping tool M8x1,25
No.: 200108046
Availability:
1-2 weeks
47.01 €
*
Unit: piece
Enter your email address and we will notify you when this item is available again.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M8
DHC 9,7
Diameter (d) M 8
Diameter (d2) 10
L1 90
L2 28
L3 11
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M8
DHC 9,7
Diameter (d) M 8
Diameter (d2) 10
L1 90
L2 28
L3 11
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
*
All prices incl. VAT and excl. Shipping.
