Recently Viewed Items
Helicoil Combined drilling and tapping tool M10x1
No.: 200108023
Helicoil Combined drilling and tapping tool M10x1
No.: 200108023
Availability:
In stock: 1
49.62 €
*
Unit: piece
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M10x1
DHC 11,3
Diameter (d) M 10x1
Diameter (d2) 9
L1 92
L2 31
L3 10
Pitch (P) 1
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M10x1
DHC 11,3
Diameter (d) M 10x1
Diameter (d2) 9
L1 92
L2 31
L3 10
Pitch (P) 1
Product type 0142.9
Thread type Metric standard and fine thread
*
All prices incl. VAT and excl. Shipping.
