motogadget motoscope tiny, black/white
Details
The motoscope tiny is a very small analog speedometer in 49mm format. It measures the speed digitally and displays it precisely via a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of installation possibilities. Sophisticated technology makes the classic look possible without compromise. The dial does not require a display cutout or LCD and has a convincing classic style. The perfect solution for purists and minimalists.
Housing:
The high-quality aluminum housing is turned from solid and its surface is black anodized. The screw ring is also available in black anodized or high gloss polished.
The housing is 100% waterproof and insensitive to vibrations. Display:
The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display which only shines through the dial during operation and is not visible when switched off.
To achieve optimal readability in darkness, sunshine and twilight, the luminosity of the LEDs is automatically adjusted.
If the 200 km/h on the analogue scale is exceeded, the speed is automatically indicated on the LED display. Also the maximum speed is stored.
The 4 indicator lights (blue, red, 2 x green) are also integrated in the dial. These are also only visible during operation.
Operation:
With the supplied menu button or e.g. the headlight flasher button on the handlebars, you can switch between the displays of the LED display.
The default display is the time. If required, the values for total kilometers, daily kilometers, on-board voltage etc. are displayed by briefly pressing the button.
All functions, such as resetting the daily kilometers or similar, are easy to operate via the button. Presettings or stored values are of course stored even without power supply.
cultivation:
The motoscope tiny is easy to mount by means of the two M3 threaded sockets on the back. We offer various brackets for mounting. See under mounting.
Connection and sensors:
The detailed installation and operating instructions (see under Downloads) make it possible for users who have previously stayed away from the vehicle electrics to connect the instrument.
The included speedometer sensor made of stainless steel is very small (M5/23 mm) and easy to hide. With the 1.5 m long connection cable it can be easily attached to the front or rear wheel. Thus, even vehicles with original mechanical speedo drive can be easily converted.
The motoscope tiny is compatible with many original speedo sensors (reed contact and proximity sensors) of the vehicle manufacturers. In this case only connections are connected and the mechanical installation of a sensor becomes completely unnecessary.
An intelligent `Teach-Function` enables the easy calibration of the speedometer - even on vehicles with sensors on the gearbox like Harley-Davidson (TM).
Scope of delivery:
- Instrument with approx. 75 cm connection cable
- mini push button
- 2 flying fuses
- 9 Cable end connectors
- Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable
- 2 strong neodymium mini magnets
- 2 fastening screws M3 with washer
- 2 diodes for merging the indicators
- Detailed installation and operating instructions
Specifications and features:
Mounting diameter: 49 mm
Weight: approx. 96 g
Fastening: 2 x M3 threaded bushing
Current consumption during operation: approx. 200 mA (load-dependent)
Current consumption in idle state: 0 mA
Operating voltage 9 V - 15 V
Operating temperature -20°... +80°C
Speedometer analog (pointer) 0 - 200 km/h or mph
Speedometer numerical (LED display) 200 - 999 km/h or mph
maximum speed 0 - 999 km/h or mph
on-board voltage 9 - 15 V
Time 00:00 - 23:59
trip meter 0 - 999,9 km or mi
Total kilometers (adjustable) up to 99 999 km or mi
Indicator lights turn signal, high beam, neutral, warning light
