MOTUL Brake fluid, DOT 3 & 4, 500 ml

MOTUL DOT 3 & 4 BRAKE FLUID

MOTUL DOT 3 & 4 Brake Fluid is a fully synthetic brake fluid based on
polyglycol-based brake fluid for disc and drum brake systems with manufacturer`s recommendation
DOT 4 and DOT 3.

SPECIAL ADVANTAGES / INSTRUCTIONS FOR USE

• Miscible with all DOT 3, DOT 4 and DOT 5.1 products.
• Particularly long-lasting brake fluid due to its high wet boiling point.
• High temperature resistance and stability due to the high dry boiling point.
• High safety standard.
• Allows the brake system to work efficiently under extreme conditions.
• Corrosion resistant, behaves neutrally towards seals in the brake system.
• Replacement intervals: Between 12 and 24 months (depending on manufacturer`s recommendation).
• Carefully seal and store in the original container to prevent absorption of moisture.
• For safety reasons, brake fluids should not be refilled but replaced!

WARNING: Do not mix with silicone-based brake fluids (DOT 5) and special mineral-based fluids (e.g. LHM). Fluid may attack vehicle paint.

PROPERTIES

Colour (visual) golden-brown
Viscosity at 100°C 2.3 mm²/s
Viscosity at -40°C 1350 mm²/s
Dry boiling point 245°C
Wet boiling point 160°C

SPECIFICATIONS / STANDARDS

STANDARDS: SAE J 1703
ISO 4925
FMVSS 116 DOT 3 & DOT 4