MOTUL Engine oil 510 2T, 4 liter

510 2T

TECHNOSYNTHESIS - ANTI SMOKE

510 2T is a 2-stroke engine oil based on MOTUL- Technosynthese® for modern 2T motorbike engines for normal stresses in everyday use in all 2-stroke engines with injection or carburettor. Suitable for both mixed and separate lubrication. Compatible with modern exhaust aftertreatment systems.

SPECIFICATIONS/STANDARDS

STANDARDS: API TC, ISO-L-EGD
APPROVALS: JASO FD N° M033MOT065

JASO (Japanese Automobile Standards Organization) has developed its own standard for 2-stroke motorbike engine oils, JASO M 345, which classifies the different qualities with the gradations FB, FC, FD with the aim of improving the performance of two-stroke oils. The JASO M 345 assesses the quality of the engine oil according to the following four criteria: Lubricity, Low Smoke Combustion, Engine Cleanliness, Exhaust System Clogging. JASO FD is a very high performance level. ISO (International Organization for Standardization) L-EGD corresponds to the requirements of JASO FC except that stricter criteria are set for the evaluation of the oil`s cleaning power. ISO L-EGD describes the currently highest performance level for 2-stroke engine oils.

ADVANTAGES

• Pre-dissolved 2-stroke engine oil allows a fast and stable fuel/oil mixture
• Perfect lubricating properties reduce friction losses and provide reliable wear protection even in high speed ranges and at high thermal loads
• Low smoke and ash combustion
• Excellent cleaning properties keep pistons and all engine parts clean
• This prevents deposits and coking in the combustion chamber, on spark plugs and in the exhaust system
• Prevents piston rings from sticking
• Good visibility in the fuel/oil mixture due to green colouring
• Available in the practical resealable 1-litre can with filler neck, dosing scale and visual strip, making it easier to refill the oil or pre-mix it

RECOMMENDATIONS AND NOTES

Before use, always observe the manufacturer`s service documents and recommendations! Mixing ratio for mixture lubrication from 2% to 4% (50:1 to 25:1) or according to manufacturer`s specifications.

PROPERTIES

Colour (visual) green
Density at 20°C ASTM D 1298 0,869
Viscosity at 100°C ASTM D 445 9,8 mm²/s
Viscosity at 40°C ASTM D 445 71,5 mm²/s
Viscosity index ASTM D 2270 118
Flash point ASTM D 92 117°C
TBN ASTM D 2896 1.2 mg KOH/g