MOTUL Engine oil Scooter Expert 4T 10W40 MB, 1 liter

SCOOTER EXPERT 4T 10W40 MB

SAE 10W-40 TECHNOSYNTHESIS - TECHNOLOGY, FUEL ECONOMY

MOTUL SCOOTER EXPERT 4T 10W40 MB is a 4-stroke scooter engine oil based on MOTUL technosynthesis. Exceeds the requirements of scooter manufacturers who prescribe SAE 10W-40 viscosity in combination with JASO MB for modern mini and maxi scooters.

SPECIFICATIONS/STANDARDS

STANDARDS: API SM / SL / SJ
APPROVALS: JASO MB N° M033MOT137

JASO (Japanese Automobile Standards Organization) has developed its own standard for 4-stroke motorbike engine oils, JASO T 903. The gradations MA, MA1 and MA2 facilitate the selection of motorbike engine oils that have been specially developed for wet clutches. JASO MB stands for a 2% reduction in fuel consumption compared to an engine oil of viscosity 10W40 and JASO MA for particularly low friction losses under all operating conditions.

ADVANTAGES

• Easy-running viscosity allows particularly fast oiling during cold starts, saves fuel and protects starter motor and battery from premature wear.
• Excellent anti-oxidation, anti-corrosion and anti-foaming properties Optimised content of sulphur and phosphorus ensure the long-term functioning of catalytic converters.
• Low evaporation loss reduces oil consumption.
• Perfect wear protection even under difficult operating conditions, e.g. stop & go traffic.
• Specially adapted filler snorkel for comfortable and leak-free filling even with very small oil filler openings.

RECOMMENDATIONS AND NOTES

Change interval according to the vehicle manufacturer`s specifications or adjusted according to operating conditions.
Before use, be sure to observe the manufacturer`s service documents and recommendations!
WARNING: Do not use in vehicles if the manufacturer specifies an oil with JASO MA release.

PROPERTIES

Colour (visual) brownish
Viscosity SAE J 300 10W-40
Density at 20°C ASTM D 1298 0.864
Viscosity at 100°C ASTM D 445 14.6 mm²/s
Viscosity at 40°C ASTM D 445 102.1 mm²/s
Viscosity index ASTM D 2270 150
Pour point ASTM D 97 -35°C
Flash point ASTM D 92 232°C
TBN ASTM D 2896 7.1 mg KOH/g