MOTUL Engine oil 7100 4T 5W40, 1 liter

7100 4T

SAE 5W-40 SYNTHESIS TECHNOLOGY, ESTER

MOTUL 7100 4T 5W-40 is a 4-stroke high-performance motorcycle engine oil with high-quality ester components and special additives for gear lubrication. Exceeds the requirements of motorbike manufacturers such as: MV AGUSTA, BMW & APRILIA, which specify SAE 5W-40 viscosity for certain models. For engines that meet Euro-2, Euro-3, Euro-4 or Euro-5 requirements. For high performance bikes, sport bikes, street bikes, trail bikes, off-road bikes, enduros, trials, quads, scooters, etc. with 4-stroke engines with or without integrated gearbox, wet or dry clutch.

SPECIFICATIONS/STANDARDS

STANDARDS: API SN / SM / SL / SJ / SH / SG
FZG damage load level > 14 FLS
APPROVALS: JASO MA2 N° M033MOT166

JASO (Japanese Automobile Standards Organization) has developed its own standard for 4-stroke motorbike engine oils with JASO T 903. The gradations MA, MA1 and MA2 facilitate the selection of motorbike engine oils that have been specially developed for wet clutches. JASO MA2 stands for the highest friction values and thus for optimum clutch compatibility when changing gears, during the acceleration phase and also at consistently high speeds.

ADVANTAGES

• Low traction coefficient of ester components reduces friction losses and improves overall performance.
• Ester components, in conjunction with the additive package, improve shear strength, wear protection and engine and transmission life. This is documented with the outstanding FZG (Forschungsstelle für Zahnräder und Getriebebau) test result of >14 FLS (Failure Load Stage). The smaller the value, e.g. 1 FLS, the lower the wear protection, the higher the value, e.g. >14 FLS, the better the wear protection of the gearbox. This test can be used to determine whether an adequate lubricant film thickness between the gears ensures reliable functioning of the gearbox.
• Optimised content of sulphur and phosphorus ensure long-term functioning of catalytic converters.
• Prevents corrosion and contamination in the engine.
• For modern engine technology with wet clutch and gearbox lubrication in the same oil bath. No clutch sticking and slipping.
• The smooth-running viscosity enables rapid oiling even in the starting phase, reduces critical cold-start wear and is excellently suited for hydraulic tappets.

RECOMMENDATIONS AND NOTES

Change interval according to the vehicle manufacturer`s specifications or adjusted according to operating conditions.
Before use, be sure to observe the manufacturer`s service documents and recommendations!

PROPERTIES

Colour (visual) red
Viscosity SAE J 300 5W-40
Density at 20°C ASTM D 1298 0.855
Viscosity at 100°C ASTM D 445 13.6 mm²/s
Viscosity at 40°C ASTM D 445 79.6 mm²/s
Viscosity index ASTM D 2270 175
Pour point ASTM D 97 -36°C
Flash point ASTM D 92 226°C
TBN ASTM D 2896 8.4 mg KOH/g