MOTUL Brake fluid racing RBF 700 FL, 500 ml

RBF 700 FACTORY LINE

MOTUL RBF 700 FACTORY LINE is a fully synthetic brake fluid based on polyglycol and has been specially developed for highest performance under racing conditions where brake systems are exposed to extremely high temperatures. Suitable for all brake systems
(steel, ceramic or carbon brake discs) currently used in racing. Can also be used in conventional brake and hydraulic clutch systems where DOT 4 is specified. Outperforms conventional brake fluids on polyglycol (DOT 3, DOT 4)

SPECIAL ADVANTAGES / INSTRUCTIONS FOR USE

• Miscible with all DOT 3, DOT 4 and DOT 5.1 polyglycol-based brake fluids, but not recommended.
• Extremely high dry boiling point of 336°C compared to other silicone or polyglycol-based products allows safe braking even under the most extreme operating conditions.
• Improves aerodynamics by reducing air intake for brake cooling.
• Very high wet boiling point of 205°C compared to other silicone or polyglycol based products allows safe braking even in high humidity or rain races.
• Under racing conditions, brakes are subjected to very high thermal stress, therefore MOTUL RBF 700 FACTORY LINE should be checked at least after every 2nd race and changed if necessary.
• Brake fluid absorbs moisture from the ambient air. This reduces the boiling point. For this reason, MOTUL RBF 700 FACTORY LINE should only be stored under constant climatic conditions, carefully sealed in the original container.

WARNING: Not miscible with silicone-based brake fluids (DOT 5) and special mineral-based fluids (e.g. LHM). Fluid may attack paint and plastic surfaces of the vehicle. Thoroughly rinse wetted surfaces with water. In case of skin contact, also rinse thoroughly with water.

PROPERTIES

Colour (visual) brownish
Viscosity at 100°C 2.06 mm²/s
Viscosity at -40°C 1580 mm²/s
Dry boiling point 336°C
Wet boiling point 205°C

SPECIFICATIONS / STANDARDS

STANDARDS: FMVSS 116 DOT 4