MOTUL Engine oil 710 2T, 1 liter

710 2T

SYNTHESIS TECHNOLOGY, ESTER - ANTI SMOKE

710 2T is a 2-stroke high-performance engine oil with high-quality ester components for the highest demands in racing and on the road in all 2-stroke engines with injection or carburettor. Suitable for both mixed and separate lubrication. Compatible with modern exhaust aftertreatment systems.

SPECIFICATIONS/STANDARDS

STANDARDS: API TC, ISO-L-EGD
APPROVALS: JASO FD N° M033MOT064

JASO (Japanese Automobile Standards Organization) has developed its own standard for 2-stroke motorbike engine oils, JASO M 345, which classifies the different qualities with the gradations FB, FC, FD with the aim of improving the performance of two-stroke oils. The JASO M 345 assesses the quality of the engine oil according to the following four criteria: Lubricity, Low Smoke Combustion, Engine Cleanliness, Exhaust System Clogging. JASO FD is a very high performance level.
ISO (International Organization for Standardization) L-EGD corresponds to the requirements of JASO FC except that stricter criteria are set for the evaluation of the oil`s cleaning power. ISO L-EGD describes the currently highest performance level for 2-stroke engine oils.

ADVANTAGES

• Pre-dissolved 2-stroke high performance engine oil allows a fast and stable fuel/oil mixture.
• Outstanding lubricating properties reduce friction losses and provide reliable wear protection even in high speed ranges and under high thermal load.
• Particularly low smoke and ash combustion.
• Due to the excellent cleaning capacity, pistons and the entire engine parts remain clean. This prevents deposits and coking in the combustion chamber, on spark plugs and in the exhaust system.
• Prevents piston rings from sticking.
• Good visibility in the fuel/oil mixture due to green colouring.
• Available in the practical resealable 1-litre can with filler neck, dosing scale and visual strip, making it easier to refill the oil or pre-mix.

RECOMMENDATIONS AND NOTES

Before use, be sure to observe the manufacturer`s service documents and recommendations!
Mixing ratio for mixture lubrication from 2% to 4% (50:1 to 25:1) or as specified by the
manufacturer`s specifications.

PROPERTIES

Colour (visual) green
Density at 20°C ASTM D 1298 0,862
Viscosity at 40°C ASTM D 445 46,4 mm²/s
Viscosity at 100°C ASTM D 445 8,9 mm²/s
Viscosity index ASTM D 2270 175
Pour point ASTM D 97 < -39°C
Flash point ASTM D 92 88°C
TBN ASTM D 2896 2.15mg KOH/g