Recently Viewed Items
motogadget mo.wave
No.: 300283174
Ducati Side fairing, left side, silver - ST2 2000-2003
No.: 48210271BB
ROCC670 matt schwarz L NML
No.: B416709-L
motogadget mo.wave
No.: 300283174
Availability:
1-2 weeks
49.00 €
*
Unit: piece
Details
The mo.wave is the first digital flasher relay with fade in/fade out effect. And additionally extremely small and load-independent.
It lets every flashing light fade in and out smoothly - even LED flashers! A new style and look when flashing - cool design for the flashing light.
Hard switching flashing lights, especially LED flashers go on and off stupidly and boringly - with the mo.wave you let the flashers shine wavelike. An absolutely new look of the flashing light - ultra small and light, practically just a piece of cable with a tiny device in candy size. Ideal for any kind of converted and styled motorcycles or cars to attract more attention.
Attention: if you are looking for a flasher relay with automatic switch-off, please see mo.stop.
Advantages:
- Unique fade-in/fade-out effect
- Ultra small and light, practically just a piece of cable with a tiny device in candy size
- Ideal for custom bikes and conversions with limited space - bulky standard flasher relays or load resistors are a thing of the past
- Installation e.g. in the handlebar pipe, frame tube or cable harness possible
- Nearly load-independent (min. 1 Watt)
- Works completely with digital semiconductor technology. Controlled by microprocessor. No mechanics, no coils, no contacts
- Always constant and correct flashing frequency therefore suitable for almost all LED flashers, all micro flashers, halogen flashers, 10 watt flashers, 21 watt flashers
- Works e.g. with 4 turn signals or 2 handlebar end turn signals
- Immediate, loss-free, brighter glow of the indicators
- Super simple connection only via two cables - just connect in series
- Absolutely waterproof and vibration resistant because it is completely encapsulated
- Short circuit proof, automatic overload protection. Switches up to 100 watt power.
- no heat generation during operation
- Operating voltage already from 5V to 18V
- Also suitable for 6 V turn signals
- Quality `made in Germany` - from motogadget
Notes:
The easiest way to install the mo.wave is to find the original relay and simply replace it with the mo.wave
. The mo.wave can NOT replace the push button control when using push button taps. See the product mo.relay+ if you are looking for a flasher relay for push buttons.
In more recent models from Harley-Davidson™ the flasher control is controlled by a special module (TSM/TSSM). The mo.wave can unfortunately NOT replace or supplement these modules.
Specifications and features:
Housing: L x W x H 18 mm x 13 mm x 9.5 mm
Length of connection cable: approx. 2 x 50 mm
Weight approx. 4 g
The mo.wave is the first digital flasher relay with fade in/fade out effect. And additionally extremely small and load-independent.
It lets every flashing light fade in and out smoothly - even LED flashers! A new style and look when flashing - cool design for the flashing light.
Hard switching flashing lights, especially LED flashers go on and off stupidly and boringly - with the mo.wave you let the flashers shine wavelike. An absolutely new look of the flashing light - ultra small and light, practically just a piece of cable with a tiny device in candy size. Ideal for any kind of converted and styled motorcycles or cars to attract more attention.
Attention: if you are looking for a flasher relay with automatic switch-off, please see mo.stop.
Advantages:
- Unique fade-in/fade-out effect
- Ultra small and light, practically just a piece of cable with a tiny device in candy size
- Ideal for custom bikes and conversions with limited space - bulky standard flasher relays or load resistors are a thing of the past
- Installation e.g. in the handlebar pipe, frame tube or cable harness possible
- Nearly load-independent (min. 1 Watt)
- Works completely with digital semiconductor technology. Controlled by microprocessor. No mechanics, no coils, no contacts
- Always constant and correct flashing frequency therefore suitable for almost all LED flashers, all micro flashers, halogen flashers, 10 watt flashers, 21 watt flashers
- Works e.g. with 4 turn signals or 2 handlebar end turn signals
- Immediate, loss-free, brighter glow of the indicators
- Super simple connection only via two cables - just connect in series
- Absolutely waterproof and vibration resistant because it is completely encapsulated
- Short circuit proof, automatic overload protection. Switches up to 100 watt power.
- no heat generation during operation
- Operating voltage already from 5V to 18V
- Also suitable for 6 V turn signals
- Quality `made in Germany` - from motogadget
Notes:
The easiest way to install the mo.wave is to find the original relay and simply replace it with the mo.wave
. The mo.wave can NOT replace the push button control when using push button taps. See the product mo.relay+ if you are looking for a flasher relay for push buttons.
In more recent models from Harley-Davidson™ the flasher control is controlled by a special module (TSM/TSSM). The mo.wave can unfortunately NOT replace or supplement these modules.
Specifications and features:
Housing: L x W x H 18 mm x 13 mm x 9.5 mm
Length of connection cable: approx. 2 x 50 mm
Weight approx. 4 g
*
All prices incl. VAT and excl. Shipping.