Visto más recientemente
Helicoil Thread cutter M5x0,8
No.: 200108000
MANICOTTO
No.: 66123410
Helicoil Thread cutter M5x0,8
N°: 200108000
Disponibilidad:
1-2 semanas
7,85 €
*
Cantidad por referencia: trozo
Introduzca su dirección de correo electrónico y le avisaremos cuando este artículo vuelva a estar disponible.
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 5
d4 5,2
DHC min. 6
Diameter (d) M 5
Diameter (d2) 6
L1 50
L2 16
L3 8
L4 19,5
Pitch (P) 0,8
Product type 0140.0
Thread type Metric standard and fine thread
Version B
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 5
d4 5,2
DHC min. 6
Diameter (d) M 5
Diameter (d2) 6
L1 50
L2 16
L3 8
L4 19,5
Pitch (P) 0,8
Product type 0140.0
Thread type Metric standard and fine thread
Version B
*
Todos los precios incluyendo con y sin impuestos Costo de envío.
