motogadget mo.button

N°: 300283190
Disponibilidad: Disponible en almacén: 1
99,00 *
Cantidad por referencia: trozo
The mo.button together with the mo.unit is a great help to reduce the `cable tangle` and simplify wiring harnesses.

With this tiny cylinder in the steering tube - or other suitable places - all handlebar fittings, switches and buttons are electrically connected.

The mo.button prepares the signals digitally and sends them via a single thin cable using state-of-the-art bus technology to the mo.unit blue, basic or mo.unit v.2.
There the consumers are then switched on and off.
All control cables go into the handlebars. This saves space, weight, work and time. A must for custom bikes with a clean look on the handlebars.

For understanding:

a) with `normal` wiring of the handlebar switches the working current (e.g. light/flasher) is led directly over the handlebar switch. Therefore, due to the current intensity, correspondingly large cable cross sections must be led from the fuse box to the switch and back to the consumer. This quickly results in thick wiring harnesses. For custom bikes with little space or hidden electrics a `No-Go`.

b) with the mo.unit without mo.button only a thin cable for each switch or button function would have to be routed to the mo.unit Only minimal control impulses are transmitted here. All large loads and currents are switched directly at the mo.unit and are fed directly to the consumer. A significant reduction and simplification of the wiring harness can already be achieved in this way.

c) the mo.unit blue, basic or mo.unit v.2 in combination with the tiny mo.button minimize the cable lengths to be laid once again! All switches/buttons on the handlebars are connected to the mo.button in the shortest possible way inside the handlebars. From the mo.button only ONE thin cable is then led to the mo.unit. The loads and currents are switched directly at the mo.unit as explained above. Less cable is not possible!

The mo.button is completely waterproof and vibration-proof encapsulated.

Specifications and features:

    The mo.button has connectors for:
  • Turn signal left
  • Turn signal right
  • Light (change between low and high beam)
  • E-Starter
  • horn
  • Brake light switch front


    Dimensions of the mo.button:
  • diameter: 12 mm
  • length: 25 mm
  • The cables have a length of about 60 cm. The connecting cable to the m-Unit is 200 cm long.
  • Weight approx. 30 gr.


Attention, the mo.button can only be used with the mo.unit blue, basic or the mo.unit v.2
Quizá lo siguiente te puede interesar...
N°: 4002040
Disponible en almacén: 1
399,00 *
Cantidad por referencia: trozo
N°: 300283167
Disponible en almacén: 1
49,00 *
Cantidad por referencia: trozo
139,00 *
Cantidad por referencia: trozo
139,00 *
Cantidad por referencia: trozo
Quizá lo siguiente te puede interesar...
N°: 4002035
Ya no se puede conseguir
N°: 4002040
Disponible en almacén: 1
399,00 *
Cantidad por referencia: trozo
* Todos los precios incluyendo con y sin impuestos Costo de envío.
Menú
Se está cargando el menú...
Visto más recientemente
motogadget mo.button
motogadget mo.button
No.: 300283190
motogadget mo.button
Utilizamos cookies para optimizar la funcionalidad y el contenido de la página web y mejorar nuestro servicio. Toda la información sobre cookies aquí Política de privacidad. Aún aceptando el uso de cookies, se puede revocar este consentimiento en cualquier momento, con validez a futuro aquí.