Dernièrement consulté
Helicoil Combined drilling and tapping tool M12x1,75
Non.: 200108035
Helicoil Combined drilling and tapping tool M12x1,75
Non.: 200108035
Disponibilité:
1-2 semaines
57,24 €
*
Unité: pièce
Saisissez votre adresse électronique et nous vous informerons lorsque cet article sera à nouveau disponible.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M12
DHC 14,3
Diameter (d) M 12
Diameter (d2) 11
L1 92
L2 35
L3 12
Pitch (P) 1,75
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M12
DHC 14,3
Diameter (d) M 12
Diameter (d2) 11
L1 92
L2 35
L3 12
Pitch (P) 1,75
Product type 0142.9
Thread type Metric standard and fine thread
*
Tous les prix incluse TVA et hors Frais de port.
