Dernièrement consulté
Helicoil Combined drilling and tapping tool M6x1
Non.: 200108045
Helicoil Combined drilling and tapping tool M6x1
Non.: 200108045
Disponibilité:
1-2 semaines
80,68 €
*
Unité: pièce
Saisissez votre adresse électronique et nous vous informerons lorsque cet article sera à nouveau disponible.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M6
DHC 7,3
Diameter (d) M 6
Diameter (d2) 8
L1 90
L2 26
L3 9
Pitch (P) 1
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M6
DHC 7,3
Diameter (d) M 6
Diameter (d2) 8
L1 90
L2 26
L3 9
Pitch (P) 1
Product type 0142.9
Thread type Metric standard and fine thread
*
Tous les prix incluse TVA et hors Frais de port.
