Dernièrement consulté
Helicoil Thread cutter M6x1
Non.: 200108403
Helicoil Thread repair kit M6
Non.: 200108006
Protection moteur Bonamici Racing, droite Kawasaki ZX-10R
Non.: 610CP010
Helicoil Thread cutter M6x1
Non.: 200108403
Disponibilité:
Disponible en stock: 1
7,50 €
*
Unité: pièce
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 6
DHC min. 7,3
Diameter (d) M 6
Diameter (d2) 6
L1 56
L2 19
L3 8
Pitch (P) 1
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 6
DHC min. 7,3
Diameter (d) M 6
Diameter (d2) 6
L1 56
L2 19
L3 8
Pitch (P) 1
Product type 0140.0
Thread type Metric standard and fine thread
Version C
*
Tous les prix incluse TVA et hors Frais de port.