Dernièrement consulté
motogadget mo.relay standard 12V/20A
Non.: 300283137
motogadget mo.relay standard 12V/20A
Non.: 300283137
Disponibilité:
Disponible en stock: 1
29,00 €
*
Unité: pièce
Details:
The mo.relay is a very small relay for controlling almost all consumers.
E.g. high beam, low beam, horn, ignition etc. can be switched easily and almost loss-free.
Larger working currents are thus placed near the consumer (e.g. lamp). Only a minimum control current must be led over ignition lock and/or handlebar switch. Failures and burnt contacts are a thing of the past.
In addition, the brightness of the lighting, for example, is noticeably improved by reduced conduction losses - a significant plus in safety.
A central threaded hole on the upper surface of the housing allows easy installation in almost any location, even when several mo.relays are installed.
The housing of the mo.relay is turned from solid aluminum and anodized in black. It is completely waterproof and vibration-resistant.
The mo.relay is not suitable as a push button control. This can be found at mo.unit.
The mo.relay is not suitable as a flasher relay. You can find these under mo.flash, mo.wave, mo.stop or with button control under mo.relay+.
Specifications and features:
diameter without cable: 19 mm
height: 19 mm
The mo.relay is a very small relay for controlling almost all consumers.
E.g. high beam, low beam, horn, ignition etc. can be switched easily and almost loss-free.
Larger working currents are thus placed near the consumer (e.g. lamp). Only a minimum control current must be led over ignition lock and/or handlebar switch. Failures and burnt contacts are a thing of the past.
In addition, the brightness of the lighting, for example, is noticeably improved by reduced conduction losses - a significant plus in safety.
A central threaded hole on the upper surface of the housing allows easy installation in almost any location, even when several mo.relays are installed.
The housing of the mo.relay is turned from solid aluminum and anodized in black. It is completely waterproof and vibration-resistant.
The mo.relay is not suitable as a push button control. This can be found at mo.unit.
The mo.relay is not suitable as a flasher relay. You can find these under mo.flash, mo.wave, mo.stop or with button control under mo.relay+.
Specifications and features:
diameter without cable: 19 mm
height: 19 mm
*
Tous les prix incluse TVA et hors Frais de port.
