motogadget mo.flash (digital indicator relais)

Details:
The mo.flash is by far the smallest load independent flasher relay on the market. Smaller and easier it could not be. The flasher unit mo.flash replaces all conventional flasher relays.

Attention: If you are looking for a flasher relay with automatic switch-off, please see mo.stop.

Advantages:

• Ultra small and light, practically just a piece of cable with a tiny device in candy size
• Ideal for custom bikes and conversions with limited space - bulky standard flasher relays or load resistors are a thing of the past
• Installation e.g. in the handlebar pipe, frame tube or cable harness possible
• Nearly load-independent (min. 1 Watt)
• Works completely with digital semiconductor technology. Controlled by microprocessor. No mechanics, no coils, no contacts
• Always constant and correct flashing frequency therefore suitable for almost all LED flashers, all micro flashers, halogen flashers, 10 watt flashers, 21 watt flashers
• Works e.g. with 4 turn signals or 2 handlebar end turn signals
• Immediate, loss-free, brighter glow of the indicators
• Super simple connection only via two cables - just connect in series
• Absolutely waterproof and vibration resistant because it is completely encapsulated
• Short circuit proof, automatic overload protection. Switches up to 100 watt power.
• No heat generation during operation
• Operating voltage already from 5V to 18V
• Also suitable for 6 V turn signals
• Quality `made in Germany` - from motogadget:

Notes:
The mo.flash replaces a conventional flasher relay. This flasher relay is usually located BEFORE the flasher switch when viewed in the circuit. The easiest way to install the mo.flash is to find the original relay and simply replace it with the mo.flash.

The mo.flash can NOT replace the push button control when using push button taps. See product mo.relay+ if you are looking for a flasher relay for push buttons.

In more recent models from Harley-Davidson™ the flasher control is controlled by a special module (TSM/TSSM). The mo.flash can unfortunately NOT replace or supplement these modules

Specifications and features:

• Housing L x W x H: 18 mm x 13 mm x 9.5 mm
• Length of connection cable approx.: 2 x 50 mm
• Weight approx.: 4 g