visualizzato di recente
Helicoil Thread cutter M14x1,25mm
No.: 200108024
Helicoil Thread cutter M14x1,25mm
No.: 200108024
Disponibilità:
Disponibile a magazzino: 1
25,47 €
*
Einheit: pezzo
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 14
DHC min. 15,6
Diameter (d) M 14x1.25
Diameter (d2) 12
L1 70
L2 22
L3 12
Pitch (P) 1,25
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 14
DHC min. 15,6
Diameter (d) M 14x1.25
Diameter (d2) 12
L1 70
L2 22
L3 12
Pitch (P) 1,25
Product type 0140.0
Thread type Metric standard and fine thread
Version C
*
tutti prezzi incl. IVA e plus Spese di spedizione.
