visualizzato di recente
Helicoil Thread cutter M16x1,5
No.: 200108043
Helicoil Thread cutter M16x1,5
No.: 200108043
Disponibilità:
1-2 Settimane
26,54 €
*
Einheit: pezzo
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 16 DHC min. 18
Diameter (d) M 16x1.5
Diameter (d2) 14
L1 80
L2 22
L3 14
Pitch (P) 1,5
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 16 DHC min. 18
Diameter (d) M 16x1.5
Diameter (d2) 14
L1 80
L2 22
L3 14
Pitch (P) 1,5
Product type 0140.0
Thread type Metric standard and fine thread
Version C
*
tutti prezzi incl. IVA e plus Spese di spedizione.
