motogadget Chronoclassic speedo, green LCD, black ring

Details:
The Chronoclassic speedo from motogadget is an analog tachometer with many additional digital functions in a classic round housing.

Technically identical to the motoscope classic speedo, the Chronoclassic speedo is characterized by its black dial and white hands. The design is reminiscent of old Smith`s instruments.

Versions:
Another special feature is the dark LC display of the DarkEdition. It gives the instrument an even more harmonious appearance.
However, we expressly point out that readability is reduced in direct sunlight. If you want the best possible readability, please use the standard green display.

The technically identical instrument is also available with a white dial (see motoscope classic speedo) or as an analog tachometer (see analog DZM series CLASSIC).

Scope of delivery:

• Instrument with approx. 55 cm connection cable
• Complete plug connection
• fuse
• Speedometer sensor M5 x 0.5 (fine thread) with 150 cm connection cable
• 2 x magnet
• Mini push button
• 3x VA screws M4
• Detailed installation and operating instructions

Please note that temperature and pressure sensors must be ordered separately (see accessories).

Specifications and features:

• Mounting diameter: 80 mm
• Total diameter (screw ring): 85 mm
• depth without cable gland: 34 mm
• Weight: approx. 230 g
• Fastening: 3 x M4 threaded bushing
• Current consumption during operation: approx. 200 mA (load-dependent)
• Current consumption in idle state: 0 mA
• Operating voltage: 9 V - 18 V
• Operating temperature: -20°... +80°C
  
• Speedometer (analog with pointer): 0 - 200 km/h o. mph, above on LC-Display
• Trip meter: up to 999 km or mi
• Total kilometers (adjustable): up to 250.000 km or mi
• Travel time display: 0 - 99:99:99 h/min/s
• Tachometer (on LCD): 0 - 20.000 rpm
• adjustable speed warning (int. LED and ext. switching flash): 0 - 20.000 rpm
• on-board voltage display: 9 V - 18 V
• NEW! Low voltage warning: LED flashes when the on-board voltage drops below approx. 11V - replaces charge control lamp
• Air temperature* (optionally instead of water temp.): -20 - 80 °C / -4 - 176 °F with high/low warning
• Water temperature* (optionally instead of air temperature): 40 - 120 °C / 104 - 248 °F with high/low warning
• Oil temperature*: 40 - 160 °C / 104 - 320 °F with high/low warning
• Oil pressure*: 0.5 - 8 bar / 8 - 116 psi with high/low warning
• Time measurement: 0 - 100 km/h or 0 - 60 mph 0,0 - 99,9 sec.
• instantaneous acceleration: (-20.0) - 20.0 m/s2
• Average speed: 0 - 350 km/h o. mph
• Maximum speed value: 0 - 350 km/h or mph
• Maximum speed value: 0 - 20.000 rpm
• max. positive acceleration: 0 - 20.0 m/s2
• max. negative acceleration: 0 - (- 20.0) m/s2
• gear indicator: N, gear 1 - 6
• green control LED: idle (N)
• yellow control LED: flasher left, right
• blue control LED: high beam
• red warning LED: various warning functions external (e.g. oil pressure switch), internal (speed, temperature, pressure, voltage)
• Output for ext. switching flash lamp: switching capacity max. 1.4 A