NML motogadget mo.unit basic

Details:
The new mo.unit basic without Bluetooth® LE has been further developed and significantly improved compared to the proven mo.unit v.2. It now has 12 inputs, 10 outputs and exchangeable quality cable clamps. It offers the same advantages as the mo.unit blue, but without Bluetooth® LE and connection to the mo.ride app.

The mo.unit basic is the digital control unit for a motorcycle, the heart of the entire vehicle electrical system. It can be operated with push-button controls or with conventional, shifting handlebar controls. It switches all necessary components on the vehicle and at the same time takes over the tasks of the electrical fuses.

Relays and individual components in the wiring harness are greatly reduced and a new, minimized wiring of the vehicle can be carried out in a very short time.

When using the mo.button, the number of all switch fitting connections is reduced to a single cable.

Functions:

• Complete digital probe control, 4-pushbutton or 5-pushbutton operation possible. Operation with switch also possible.
• Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off in case of malfunctions. After elimination of the fault, the fuse function is automatically reset
• Integrated alarm system with position-independent gravitational sensor
• Integrated, digital, load-independent flasher relay, automatic switch-off optional and adjustable, mo.wave mode selectable
• Integrated hazard warning lights - works even with the ignition switched off
• Blinker optional as position light. Light intensity adjustable
• parking light and headlight flasher integrated
• Control of dipped and main beam (up to 200 W switching capacity) with only one button
• Integrated, digital brake light modulator, flashing mode programmable
• Acceleration-controlled hazard brake light (automatic warning signal)
• Integrated starter relay for starters with magnetic switch (up to 30 A switching capacity)
• Intelligent and configurable control/disconnection of the loads to be able to use the maximum starting energy of the battery during the starting process
• Integrated, digital horn relay
• Two configurable additional outputs AUX1 and AUX2
• Diagnostic function for assignment of input, output, switching status of the circuit, short-circuit diagnosis etc. via 22 LEDs
• Calibration and current measurement enables defect detection of all illuminants
• Operation of a rear light/brake light combination with only one supply line possible
• the mo.unit basic enables a minimal wiring harness and easy cabling - especially with mo.button smallest dimensions
• absolutely waterproof and vibration resistant

Scope of delivery:

• mo.unit basic
• 1 x M5 stainless steel screw
• 2 x M5 stainless steel screw with nut
• Detailed installation and operating instructions

Specifications and features:

• L/W/H 90 x 53 x 30 mm, bore distance 74 mm
• Weight approx. 180 g
• Mounting 2 x M5 stainless steel screws (mounting and ground connection), 1 x M5 screw contact for Battery Plus
• Operating voltage 6 V - 20 V
• Operating temperature -20°... +80°C
• Inputs:

1 x input (+12V switched) for ignition lock or mo.lock
11 x control input (minus/ground switched) for:



1. Turn signal left
2. Turn signal right
3. Low-beam/main beam
4. starter
5. horn
6. Brake light
7. Kill switch
8. stand switch
9. LIN-Bus
10. AUX1
11. AUX2


• Outputs:

10 x output (+12V) for:



1. Turn signal left
2. Turn signal right
3. Dipped beam
4. high beam
5. starter
6. horn
7. Brake light
8. ignition
9. AUX1
10. AUX2