Visto más recientemente
Helicoil Combined drilling and tapping tool M16x1,5
No.: 200108042
NML Set de reparación de pinza freno M4 34mm con pistones
No.: 205474773
Helicoil Combined drilling and tapping tool M16x1,5
N°: 200108042
Disponibilidad:
1-2 semanas
58,07 €
*
Cantidad por referencia: trozo
Introduzca su dirección de correo electrónico y le avisaremos cuando este artículo vuelva a estar disponible.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M16x1,5
DHC 18
Diameter (d) M 16x1.5
Diameter (d2) 14
L1 92
L2 39
L3 14
Pitch (P) 1,5
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M16x1,5
DHC 18
Diameter (d) M 16x1.5
Diameter (d2) 14
L1 92
L2 39
L3 14
Pitch (P) 1,5
Product type 0142.9
Thread type Metric standard and fine thread
*
Todos los precios incluyendo con y sin impuestos Costo de envío.