visualizzato di recente
Helicoil Combined drilling and tapping tool M16x1,5
No.: 200108042
Helicoil Combined drilling and tapping tool M16x1,5
No.: 200108042
Disponibilità:
1-2 Settimane
58,07 €
*
Einheit: pezzo
Inserisci il tuo indirizzo e-mail e ti avviseremo quando questo articolo sarà di nuovo disponibile.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M16x1,5
DHC 18
Diameter (d) M 16x1.5
Diameter (d2) 14
L1 92
L2 39
L3 14
Pitch (P) 1,5
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M16x1,5
DHC 18
Diameter (d) M 16x1.5
Diameter (d2) 14
L1 92
L2 39
L3 14
Pitch (P) 1,5
Product type 0142.9
Thread type Metric standard and fine thread
*
tutti prezzi incl. IVA e plus Spese di spedizione.